NaN -Infinity

Greenworks

60V 16" 1.5KW Cordless Battery Chainsaw w/ 2.5Ah Battery and 3A Charger

SKU 2028602

MODEL# CS60L2510

Faster cutting than a 30cc gas-powered chainsaw
What's Included: One (1) 2.5Ah Battery and Charger
4-Year Tool and Battery Warranty
Included 60V battery powers over 75 Greenworks 60V tools

View more details

Product variants

$269.99

$269.99 ~~$269.99~~

Quantity

Select an option:
You can choose tool only or bundle with a variety of compatible products.

View full details

$269.99

Details

Key features

- With 1.5kW brushless motor, faster cutting than a 30cc gas-powered chainsaw

- Intelligent Brushless Motor Technology. 2x More Torque. Provides More Power, Longer Runtimes, Quiet Operation, and Extended Motor Life

- Powered by interchangeable 60V advanced lithium-ion battery for reliable, long-lasting power - battery fits all Greenworks Pro 60V tools

- No Prime, No Choke, No Pull- easy-starting system for fast starts every time, with no aggravating pull cord

- Cut up to 28" Logs

- Side-mounted chain tensioning for easy bar and chain maintenance

- Automatic chain oiler takes away the guesswork

- Includes 60V 2.5Ah Battery & Charger

- 4 Year Limited Tool & Battery Warranty

Frequently Asked Questions

What oil do I use with my chainsaw?

Our units use a standard bar and chain oil. You can purchase this from your local hardware store; no specific brand name is required.

Why is my chainsaw leaking oil?

All chainsaws will slowly “leak” oil in storage (mostly from it seeping off the chain). To prevent excessive leakage, store with as little oil left in the reservoir as possible, the chainsaws flat with a rag beneath them and the pole saws upright with the motor head at the top.

During first use users should only fill the reservoir to roughly half full and check periodically to see if it needs to be refilled. Eventually, you will become accustomed to the amount of oil required for each job. This procedure will make it easier to store the unit as oil free as possible and reduce oil run off.

How large of a branch/log can I cut?

If you are looking to cut logs with one pass, the log needs to be about 2" smaller than the bar. However, there are many techniques to use a chainsaw for larger cuts.

What is the run time?

The run time of a chainsaw is measured in cuts per charge. The number of cuts per charge or “run time” that you receive would depend on the load acting on the saw (i.e., the thickness and type of wood being cut) as the chainsaw would use more battery power on tougher and thick objects being cut.

How do I know if my chain is tensioned enough?

Chains should be tensioned before use. Check intermittently throughout each chore to make sure the chain is kept properly tensioned. A correctly tensioned chain should only pull away from the bar enough to fit a dime (10c) between the teeth and the bar.
***DO NOT TENSION A CHAIN AFTER YOU HAVE FINSHED USING THE TOOL. HOT METAL EXPANDS. IF THE CHAIN IS TENSIONED WHEN HOT, THEN ALLOWED TO COOL, THE CONTRACTING METAL COULD POTENTIALLY DAMAGE THE CHAIN, THE BAR AND EVEN THE UNIT. WAIT UNTIL THE NEXT USE (OR AT LEAST UNTIL COOLED) BEFORE TENSIONING***

Can I use another brand of chain?

Yes, you may. However, it must match the specifications of the original chain (gauge, pitch, and drive links). These specifications my be found inside of your owner’s manual.

What file size do I use to sharpen the chain?

Our chains may be sharpened using a 5/32” round file.

Why isn’t my chain cutting?

If the wood is burning/smoking, this indicates that the chain is on backwards. Another reason could be that the chain is dull and needs to be sharpened or replaced.
Replace the chain if:
• The length of the cutting edges is less than 5 mm.
• There is too much space between the drive links and the rivets.
• The cut speed is slow
• Sharpening the chain many times but it does not increase the cutting speed. The chain is worn.

What's Included